Call us: 647-899-9693 Email: cnc9693@gmail.com
Sales & service across Ontario and Quebec
Bidja
Software

Software for CNC shops, from people who service the machines.

We build these programs and apps ourselves, from what we see on the shop floor every day.

Windows Bidja CNC Transfer Send and receive CNC programs with FANUC, Mitsubishi, Siemens, Heidenhain, Haas, Okuma and more. Details → New · Hardware Bidja DNC Box Wi-Fi to RS-232 at the machine. No long cable, no laptop beside the control. Details → iPhone & iPad iCNC Watch your FANUC machines from your iPhone or iPad. Details → iPhone iAgent A self-learning assistant that works fully offline. Details → iPhone + Clinic Device iHealth Your health records on your iPhone, with tap-to-register at the clinic. Details →
Windows 10 / 11 · Free 30-day trial

Bidja CNC Transfer

Send and receive CNC programs between your PC and your machines, all in one list: FANUC, Mitsubishi, Siemens and Heidenhain over Ethernet, Haas, Okuma and Mazak through their network folders, and any control with RS-232. No internet needed on the shop floor.

New in this version: the Bidja DNC Box for RS-232 machines over Wi-Fi, drip-feed restart from any block number, optional full SRAM backup (FANUC), Siemens SINUMERIK over OPC UA, Heidenhain TNC over LSV2, Mitsubishi M800 / M700 over Ethernet, FANUC operation history, and set-up help for Haas and Okuma network folders.

Supported controls
ControlConnectionModelsNotes
FANUC Ethernet (FOCAS2)
RS-232
Older controls: 0i-C, 16i / 18i / 21i
Newer controls: 0i-D, 0i-F, 30i / 31i / 32i / 35i (A and B)
Program memory and folders, Data Server (DS) if the machine has one, machines with several heads (paths), full backup, drip-feed and operation history. The control type is found by itself when you add the machine.
MitsubishiNew Ethernet (EZSocket)
RS-232
M800 / M80 series
M700 / M70 series
Machining centers and lathes; older series (E60, M60, C6…) over RS-232
Needs Mitsubishi EZSocket on the PC. It comes with the free Mitsubishi NC Explorer.
SiemensNew Ethernet (OPC UA)
Network folder
RS-232
SINUMERIK 828D and 840D sl (SINUMERIK Operate)
840D powerline, 810D: RS-232
OPC UA works directly with the control's Part Program, Sub Program and Work Pieces folders. It needs the control option Access MyMachine / OPC UA and a user with file rights. Without the option, use a shared folder as a network drive on the control.
HeidenhainNew Ethernet (LSV2)
Network folder
RS-232
TNC 640, TNC 620, TNC 320, TNC 128, iTNC 530 The same connection Heidenhain's TNCremo uses (port 19000): programs and folders on the TNC drive. No Heidenhain software needed on the PC. On the control, allow external access.
Haas Network folder (Net Share)
RS-232
NGC controls (most machines from 2016 on)
Classic Haas: RS-232
Uses the control's Local Net Share: the program sees the control's User Data folder. Set up under SETTING → Network → Net Share.
Okuma Network folder (Windows share)
RS-232
OSP-P200, OSP-P300, OSP-P500
Older OSP: RS-232
Uses the control's shared program storage (MD1), the way Okuma's own tools transfer programs. Make new folders on the control itself.
Mazak Network folder or FTP
RS-232
Mazatrol SmoothG / SmoothX, Matrix Works with the control's shared program folder.
Other controls Network folder or FTP
RS-232
Any control that shares a folder on the network, has an FTP server, or has a serial port RS-232 settings (baud rate, parity, handshake, end of block) are set per machine.

Ethernet on the machine must be set up and reachable from the PC. Not sure about your machine? Ask us, with the control model.

What it does

Send, receive and delete

Move programs between the PC and the machine. Select several at once. You're asked before anything on the machine is replaced.

All machines in one list

Every machine connects when the program opens, with a status light for each one.

Running program in red

The program selected on the machine is shown in red, so you don't overwrite the one being cut.

Memory at a glance

Program count and free memory on the machine each time the list is read.

Editor and compare

G-code editor with search, and side-by-side compare of a PC file with the program on the machine.

Full backup (FANUC)

Save all programs and machine data from a FANUC control to the PC, head by head.

Drip-feed (DNC)

Run long programs straight from the PC, over RS-232, FANUC Ethernet or a Bidja DNC Box, with restart from any block.

Transfer log

Every send and receive is logged with the date, machine and program.

Move to a new PC

Export your machine list and settings to a file, protected by a password, and import it on the next PC.

Operation history (FANUC)

See what was done on the control: keys pressed, alarms, power on and off, offset and parameter changes. Save it for Excel.

Heads and Data Server (FANUC)

Machines with two or more heads, and the FANUC Data Server, switched with one click.

Help for every control

Each make shows what to set on the control and in the program, and Test connection checks it before you save.

New · Works with Bidja CNC Transfer

Bidja DNC Box

No long RS-232 cable. No laptop beside the machine.

The Bidja DNC Box sits at the machine, joins your shop Wi-Fi and talks to the control through a short RS-232 cable. Send programs from the office with CNC Transfer; the operator loads them from a phone or tablet at the machine.

How it connects
Office PC Bidja CNC Transfer
Shop Wi-Fi
Bidja DNC Box at the machine
RS-232
CNC control FANUC, Haas, Mazak, Okuma…

Plus the operator's phone or tablet at the machine: load, drip-feed or stop from the box's own page.

What it does

Send from the office

Programs go from CNC Transfer to the box. Load them into the control from the PC or at the machine, with live progress.

Drip-feed with restart

Run long programs straight from the box. Restart from any block number, like N1500, after a broken tool.

Save from the control

Press PUNCH on the control: the program lands on the box and shows up in CNC Transfer, ready to keep on the PC.

Phone or tablet at the machine

The operator loads, drip-feeds and stops from the box's page in any browser. Nothing to install.

Ethernet controls too

A FANUC control with an Ethernet port but no cable to the shop? The box connects it to CNC Transfer over Wi-Fi.

Set up from a phone

Join the box's setup Wi-Fi, pick your shop Wi-Fi: done. After a power cut it reconnects by itself.

Genuine and protected

Every box has its own Bidja serial number and certificate. An optional PIN keeps others from sending to your machines.

Works with any RS-232 control

FANUC, Haas, Mazak, Okuma, Mitsubishi and others: 1,200 to 38,400 baud, settings chosen per control.

Up and running in three steps
  1. 1Plug in the box and its RS-232 cable at the machine.
  2. 2Connect it to your shop Wi-Fi from a phone, using the setup Wi-Fi on the box label.
  3. 3Add it in CNC Transfer: Find locates the box for you.

2.4 GHz Wi-Fi is needed where the machine stands. Not sure about your control or Wi-Fi? Ask us, with the control model.

iCNC app icon
Free on the App Store

iCNC

Watch your FANUC CNC machines from your iPhone or iPad. Works with FANUC controls that support Ethernet and FOCAS on your local network.

  • Live status: running, alarm, feed hold
  • Program, feed, speed and parts count
  • Alarm history and troubleshooting help
  • Axis and spindle load monitoring
  • Program transfer and full data backup
Download on the App Store
iAgent app icon
iPhone App

iAgent

A self-learning assistant for your iPhone. It learns from your feedback right on the phone and works fully offline, with no cloud AI.

  • Reminders you teach it by chat
  • Reads your calendar and Apple Reminders
  • Daily list of the companies you visited
  • Invoices and packing slips on your letterhead
  • Messaging between iPhones on the same Wi-Fi
Ask about iAgent
iHealth app icon
iPhone App + Clinic Device

iHealth

Your health record on your iPhone, including your hospital records. Tap our clinic station to register in one tap: your details go straight to the clinic, encrypted, with no paper forms, no cloud and no monthly fee.

  • Medication reminders, added from a photo of the pharmacy label
  • Daily log, Apple Health dashboard and a doctor report PDF
  • Hospital records from MyChart (Epic) and Apple Health, checked against your name and date of birth
  • Tap-to-register over NFC with Face ID, always encrypted, never through the cloud
  • Clinic side: copy into any EMR, a chart PDF, or a direct connection to OSCAR
  • Signed prescriptions and reports come back on the same tap
Ask about iHealth for your clinicLearn more about iHealth →

Questions about our software?

Call 647-899-9693 or email cnc9693@gmail.com.

Contact us